top of page

Poultry Butler Models

The Poultry Butler comes preassembled with everything you need for either timer (you set the open/close times) or light sensor (the amount of daylight governs the opens/close times) operation. The door is installed on the inside of your coop over a precut opening 2” above the coop floor. The Poultry Butler can also be installed in an exterior fence if freezing is not an issue. You will need to install the power supply and the timer/controller in a waterproof area. The optional 15’ control cable is required.


 Standard Automatic Chicken Coop Door 

Standard Door - Size: 9" x 13" Mounting Area: 12" x 32"
bottom of page